ENGINE and PROPELLER	Please call for prices.
180 HP LYCOMING ENGINE & PROP CONVERSION: Speed increase of approximately 25 miles per hour. Higher twin and single engine ceiling, shorter take-off and increased useful load. Lighter weight props with dynafocal engine mounts reduces noise and vibration which results in lower operating costs, more comfort and increased performance. Optional Q-Tip Props reduce sound levels by five DB and slightly increase climb speed. The down time is about one month.
FIBERGLASS NACELLES	$16595 INSTALLED
Low drag fiberglass engine cowling incorporates major improvements to the engine cooling system, engine accessibility and aircraft appearance. Engine Cowling and Turtleback - All new components. Air Induction System - All new components up to carburetor. Engine Cooling System - All new components. Oil Cooling System - All new components up to the oil cooler. Streamlined in design, the cowling increases airspeed approximately five mph and markedly enhances the aircraft's appearance and resale value. Camloc fasteners allow engine cowling to be completely removed from both engines in less than five minutes with installation in like time. Engine baffling has been completely replaced with a new, simpler and more efficient design to sharply reduce failure and maintenence requirements. Approved for standard Piper PA23 or PA23-160 with the Geronimo 180 HP conversion. Price does not include painting. Down time - fifteen days plus painting time.
EXTENDED NOSE and WHEEL WELL DOORS	$ 16,895 INSTALLED
The nose is 31 inches longer than standard with a baggage compartment. Wheel well doors fully enclose wheels in streamlined aerodynamic bubbles. This modification does more for performance and aesthetics than any other mod except the 180 HP engine conversion. Airspeed is increased by ten to twelve mph. Rate of climb, single engine performance, CG stability and cabin ventilation are substantially increased. Modifications are made of impact resistant fiberglass. This combination of modifications goes far towards making the Apache perform and look like a modern day light twin. Relocation of antennas are extra. Down time three weeks.
EXTENDED SHORT NOSE	$ 5,195
The nose is 16 inches longer than standard with a baggage compartment.
WING TIPS	$2,295
Improves lateral stability, stall characteristics and appearance. Increases speed approximately four mph, decreases take-off distance and lowers the stall speed. The wing span is reduced by 22 inches.
WING TIP TANKS	$4,895
Same aerodynamic advantages as the regular wing tips plus an increase of 48 gallons of fuel capacity.
DORSAL FIN	$ 1,179
Reduces single engine control speed and yaw tendency in turbulence. Greatly improves single engine performance.
SQUARE TAIL	$ 1,295
Greatly improves the appearance and single engine performance of the aircraft. Includes fiberglass horizontal stabilizer fairings (both sides) for a slightly increased airspeed.
TAIL CONE	$ 595
Increases speed & directional control, and is more streamlined in appearance.
FLAP GAP SEAL KIT	$ 849
Flap gap seals lower the stalling speed and increases the rate of climb, cruise and top speeds, especially when heavy or at high altitudes.
ONE PIECE WINDSHIELD KIT	$ 949
Quarter-inch thick, distortion free plexiglass. Adds greater safety with improved forward visibility. Includes new fiberglass cowler. Available in green tint or solar gray for additional $40.
ONE PIECE SPEED SLOPE WINDSHIELD KIT	$ 1,495
Quarter-inch thick, distortion free plexiglass. Much more streamlined than the standard one piece windshield. Increases airspeed up to four mph. Tremendous improvement in appearance and style. Includes new fiberglass cowler and hardware. Available in green tint or solar gray for additional $60.
ENGINE NACELLE & WING ROOT FAIRING KIT	$ 1,295
Improves airflow for reduced drag, a slight increase in airspeed and an enhanced appearance.
FIBERGLASS ENGINE NOSE BOWLS	$ 1,400
Replace the original with impact resistant fiberglass. Eliminates problems of metal fatigue, cracking, splitting and repairs.
GROSS WEIGHT INCREASE	$ 2,500 INSTALLED
A computer assisted engineering study has culminated in an STC allowing Diamond Aire to increase the maximum gross weight of the Piper PA23 (150 HP Apache) Geronimos, from 3684 pounds to 4000 pounds. Down time 2 weeks.
INFLATABLE DOOR SEAL KIT	$ 595-949
Greatly improved sealing for your protection. Considerably lower cabin noise and lasts longer than other door seals. Available with either electric or manual pump. Call with specific application. This enhancement also approved for Aztecs.
FIBERGLASS WINDOW MOLDINGS	$ 450-950
Available in several different options. Call for details.
New! Modern Throttle Quadrant Control Lever Kit
New! Vortex Generators
INSTRUMENT PANEL STC KIT	$ 1,195
Approved for Aztec, Apache & Geronimo aircraft, this one-piece design eliminates cockpit display clutter and is shock-mounted to isolate full panel. Several panel styles include back-lighting or post-lighting, engine instrumentation and radio configuration options. Dual centerstack design with option for copilot instruments. Price includes STC paperwork, eight Lord mounts and complete installation plans. STC affords the owner/installer great latitude in customizing panel to fit individual avionics & instrumentation needs without the need for a field approval. Installation available, call for details. We also offer a new fiberglass glareshield in two styles for $389. Note: PMA approved, 2-1/4 inch round, dual backlit engine instrumentation/fuel gauges available soon!
REAR BAGGAGE COMPARTMENT KIT	$ 1,295
Aluminum construction, measures 33 inches deep, 36 inches high. Extends cabin & baggage area to create a more modern interior appearance.
THIRD WINDOW KIT	$ 2,295
Aztec Style available in several different options. Improves passenger comfort, styling and appearance. Call for details.
DUAL BRAKE KIT	$ 1,995
Includes upgrading system to dual Cleveland brake calipers. Holds aircraft during application of full power engine run-up and shortens landing roll. Especially useful with gross weight increase STC.
HIGH DENSITY SOUNDPROOFING KIT	$ 1,295
Reduces noise level to a point of normal conversation. Improves passenger comfort and is an effective barrier against heat transfer. Can be installed with or without the purchase of a new interior.
MAJOR AIRFRAME INSPECTION and OVERHAUL
This inspection far surpasses a 1000 hour inspection and brings the airframe back to factory new tolerances. Price will vary greatly with condition of airframe. Call for details.

Rams-horn style control yokes. We currently have this STC but our supply has back-ordered. A new manufacturer is in the process of designing an updated style yoke similar to the Aztec F yoke. It will include push-to-talk switches on both yokes, provisions for autopilot cut-off switches on both yokes, and electric trim switch-mounting provision on pilot yoke. Price will be about $1,295 per pair.

Rochester engine instrumentation.We are currently working with Rochester Gauges of Texas to introduce new 2-1/4" dual-needle STC'd backlit gauges. All gauges will be electronic with analog movements. They will include: Fuel quantity with new sending units, oil temp, oil pressure, fuel pressure, CHT & EGT. These gauges will eliminate the inaccuracy and availability problems associated with the old AC and Stewart Warner obsolete OEM units installed at the factory. These will be available for injected, carburated and turbo-charged models. A 3-1/8" dual electric STC'd tachometer will also be available. This unit will pick-up signals from the magnetos, thus eliminating the need for noisy, heavy tach cables or expensive tach generators. Other advantages of these new gauges includes reduced weight, modern appearance and no oil or fuel lines running into the cabin. All gauges will be switchable for 14v or 28v operation.

Co-pilot brakes. We have been working with a firm in Wisconsin to add co-pilot brake pedals and hydraulics similar to the OEM design found on some E and most F model Aztecs. These will become available for all Aztec and Apache/Geronimo models in the near future.

NOTES:

1. All prices subject to change without notice.
2. The state of Montana has no sales tax.
3. Kit prices do not include crating or shipping charges.
4. All modifications include PMA-approved parts.
5. Some modifications approved for PA23-250 (Aztec).
6. Speed figures established by exhaustive testing, and are relative to particular airframes and other installed modifications. They are accurate to within 2%.